Guide · 2 November 2026 · 7 min read
School hydroponics lab: step-by-step educational project
Objectives, links with subject areas, equipment for a classroom, annual calendar, safety and purchasing through MePA and tenders.

A school hydroponics lab is built with a compact system (a tower or a vertical system on a cart), a few measuring instruments, a light source, and a calendar shared with the class: it starts in September with germination, and throughout the year, students work on measurements, observations, and comparisons between groups, while carefully planning for the holiday break. The purchase can be made through MePA or with funds from dedicated calls for proposals.
Hydroponics brings science, technology, and civic education into the same subject: plants grow in front of the students, real measurements are taken, and water, food, and sustainability are discussed. Here you will find a step-by-step project proposal: objectives, links to subjects, what to buy, how to organize the year, what to do safely, and how to proceed with the purchase. For an overview of proposals for schools, see the schools and education page.
In short
- Objective: to provide direct experience with photosynthesis, plant nutrition, measurement, and observation.
- Links: science (plants, pH, nutrients), technology (pumps, timers, sensors), civic education (water, food, sustainability).
- Minimum equipment for a class: a vertical system or a tower, light (if there is no window), pH meter, EC meter, germination kit.
- Calendar: start in September-October, 4–8-week cycles, specific plan for Christmas, Easter, and summer holidays.
- Safety: electricity and water separated, chemicals handled by the teacher, hygiene before eating.
- Purchase: MePA and calls for proposals and funding, with the school office and the DSGA.
Educational objectives
A lab works if it has clear objectives. Here are some learning objectives adaptable to primary, lower secondary, and upper secondary school:
- Understand what plants need to grow: water, light, nutrients, temperature.
- Observe the stages of a plant, from germination to harvest.
- Measure and record data: pH, EC, temperature, height, days.
- Formulate hypotheses and compare groups of plants grown in different conditions.
- Connect what is done in class to real-world topics: water consumption, short supply chains, fresh food in cities.
Links to subjects
| Subject | Topics covered | Possible activity |
|---|---|---|
| Science | Photosynthesis, mineral nutrition, pH scale, plant life cycle | Comparison between plants with different light; growth diary |
| Mathematics | Measurements, averages, graphs, proportions, dose calculation | Weekly growth graph, water consumption table |
| Technology | Pumps, timers, water circuit, sensors | System assembly, light/dark cycle setup |
| Civic education | Water use, sustainability, short supply chains, nutrition | Discussion and report on a recirculating system versus one in the field |
| Italian and languages | Reports, technical sheets, scientific glossary | Lab diary, poster, or presentation for families |
| Food education | Seasonality, hygiene, tastings | Tasting leaves and microgreens following hygiene rules |
The site's glossary is a good resource for older classes: start with nutrient solution, pH, and vertical tower.
What to grow in class
Choose fast-growing, hardy crops that yield visible results in a few weeks. Microgreens are ideal for a first experience: they grow in a few days and do not require a complex system. Among plants suitable for repeated harvesting are lettuce, basil, and arugula: you can check the pH and EC of each crop in the plant manual. Avoid fruiting vegetables at first, as they require a lot of light, time, and care.
Equipment for a class
For 20–25 students, one system is enough, around which they work in rotating groups, rather than many small stations. Indicative options:
- Vertical system on wheels: the Start2Grow Agricooltur is a vertical system designed for schools and can be moved between classrooms.
- Hydroponic tower: the 24-plant tower is a good compromise for a lab. To understand how it works, read the guide to the vertical tower.
- Smart home system: the LetPot Mini is small and suitable for experiments on a single desk.
- Germination and microgreens: the beginner germination kit and the vertical germinator are the first step.
- Measuring instruments: a pen-type pH meter and a 4-in-1 tester, with the relevant calibration solutions.
- Teacher training: the online hydroponics video course is useful for preparation.
For light: if the classroom has no bright windows, you need a lamp or an LED bar (lighting and LED) with a timer. For other systems, see the kit and complete systems categories, and towers and vertical systems. To size the system based on the number of students, you can use the sizer.
The school year calendar
| Period | Activity | Notes |
|---|---|---|
| September-October | System assembly, lab rules, first sowing (microgreens, lettuce and basil germination) | Do an initial test cycle before involving the whole class |
| November-December | Transplanting, weekly measurements of pH, EC, and growth, comparison between groups | Prepare the Christmas holiday plan in advance |
| Christmas holidays | Harvest before closing or control plan | Full tank, checked timer, reduced or turned-off light |
| January-March | New cycle, a targeted experiment (light, nutrients, variety) | More complete data and final group report |
| April-May | Harvest, tasting, presentation to parents or other classes | Pay attention to holidays and Easter breaks |
| June | Disassembly, washing, and storage | Empty the tank and let it dry |
The most delicate point is the break: one week of closure is manageable with a full tank and a timer, while two or more require harvesting everything, emptying the system, or entrusting it to someone who stops by. Summer is the right time to disassemble and clean. For routine maintenance, see the guide on hydroponic tower maintenance, which you can find among the other guides on the blog.
Safety in the classroom
- Electricity and water. Keep outlets and transformers away from possible splashes and use protected outlets; check that the system is connected to an outlet with a residual current circuit breaker and ask the school's safety officer for confirmation.
- Chemical products. Fertilizers and pH adjusters are handled only by the teacher, with gloves and goggles. Store everything in a closed cabinet, in the original packaging.
- Light. Grow LED lamps are very bright: do not stare at them closely or point them toward the eyes.
- Hygiene. Wash hands after every activity. If you taste what you harvest, wash the plants thoroughly, use only seeds for food use, and check for allergies and intolerances with families.
- Floor. A tarp or tray under the system prevents slipping in case of leaks.
- Classroom rules. Clear tasks for each group: who measures, who records, who checks the level.
How to purchase: MePA and calls for proposals
The school purchases according to public administration rules. On the how to purchase on MePA page you will find how the step-by-step process works, and on the calls for proposals and funding page the possibilities of financial coverage for educational projects. Opportunities change over time: calls for proposals have different deadlines, requirements, and amounts, and the right procedure depends on the purchase value. The school principal and the DSGA are the references for choosing the most suitable path.
To present the project well, describe in a few lines the goals, involved classes, duration, subjects, expected results, and the safety plan from this guide. A project with concrete objectives and a calendar is evaluated better than a simple purchase request. If you want a cost comparison, the guide on the cost of a hydroponic system helps set the quote.
New in the store: the new modular vertical hydroponic tower with 24 or 28 spots, with a 40-liter tank in three colors (white, green, or black), pump, and tubes included. It is designed and printed in Italy in polypropylene suitable for food use; each module retains a reserve of solution, so the roots remain submerged even if the pump stops for a while, and it can be expanded up to 32 spots.
Frequently asked questions
What class can you start with?
Primary school, with simple activities such as germination, observation, and measurement. In secondary school, pH, EC, graphs, and experimental hypotheses are added.
Is a dedicated lab needed?
No: a corner of the classroom or hallway with an electrical outlet, adequate light, and an easy-to-clean floor is enough. A system on wheels allows moving the system between classrooms.
What happens during Christmas or summer holidays?
For short breaks, leave the tank full and the timer controlled; for long breaks, harvest, empty, and clean the system. Plan these dates at the beginning of the year.
Who takes care of the system on weekends?
After an initial testing phase, a well-started system requires a few minutes a day. Appoint a teacher or collaborator as a reference and plan a rotation.
How do I choose the right system for my school?
It depends on the number of students, space, and budget. Start from the schools and education page. If a problem concerns the plants and you cannot figure it out, you can send a photo of the plant to the site chat assistant.
From theory to numbers
Continue with the tools
- Consumption calculatorEstimate energy, water and nutrients before you buy.Open
- Plant manualParameters, compatible systems and cycles for every crop.Open
- System sizerStart from your space and build your system configuration.Open


