Acquaponica.Shop

Guide · 17 November 2026 · 8 min read

Hydroponic microgreens: a step-by-step guide

How to grow microgreens: suitable seeds, growing media, planting density, darkness and light, watering, harvesting, and how to prevent mold.

Vassoio di microgreens misti verdi e porpora coltivati in idroponica

To grow microgreens, sow suitable seeds densely on moist growing medium or a mat, keep them in the dark for 2–4 days, then move them into the light, water from below, and harvest the seedlings when the first leaves (the cotyledons) have opened, usually after one or two weeks depending on the species. Mold is the real enemy, which can be prevented by using clean seeds, moist but not waterlogged growing medium, and moving air.

This is the fastest crop you can grow at home: all you need is a tray, a little light, and a few days. They grow well on a bright windowsill, in a bookcase with an LED light, or on a dedicated cart. In this guide, we’ll look at which seeds to choose, which growing media to use, how to manage density, darkness, light, and water, when to harvest, and how to avoid the most common mistakes.

In short

  • Choose seeds intended for food: radish, arugula, mustard, cabbage, creole, sunflower, pea, and basil.
  • Growing medium: fiber mat, coconut coir, felt, or jute, always moist and never waterlogged.
  • Sow densely but not in layers: the seeds should just touch, not overlap much.
  • Keep them in the dark and in contact with the growing medium during the first stage (2–4 days), then provide light for 12–16 hours.
  • Water from below or with a mister, avoid waterlogging, and keep the air circulating.
  • Harvest just above the growing medium when the cotyledons are fully open, usually after 7–14 days.

What microgreens are (and what they are not)

Microgreens are edible seedlings harvested shortly after germination, once they have developed a stem and their first two cotyledons, and sometimes their first true leaves. Do not confuse them with sprouts, which are eaten whole with their roots and seeds after a few days in water, or with baby leaves, young leaves from larger crops harvested after several weeks. You don’t need the concentrated nutrient solution used in a grow tower: the seed already contains the reserves needed for initial growth, and at most, you can add a very weak solution.

Which seeds to choose

The seeds must be suitable for food, clean, and untreated. Some species are easy and fast to grow, while others require more attention. To get started, choose those in the table.

Species Difficulty Soaking Estimated harvest Notes
Radish Easy Not necessary 6–10 days Fast-growing, spicy flavor, excellent for beginners
Arugula Easy Not necessary 8–12 days Fine seeds; be careful not to sow them too densely
Mustard and cabbage (broccoli, red cabbage) Easy Not necessary 7–12 days Small, very uniform seeds
Creole Medium Not necessary 8–14 days Seeds that form a gel: keep moist, not wet
Pea Medium 8–12 hours 8–14 days Large seeds, very sweet, produce a lot of biomass
Sunflower Medium 8–12 hours 8–12 days The husks remain attached to the leaves: rinse and remove them after harvesting
Basil Slower Not necessary 14–21 days Grows slowly and needs more warmth

The times given are estimates and vary with temperature, light, and variety. For a ready-made mix, the microgreens plant guide recommends pH levels of 5.5–6.5 and an EC of 0.8–1.2 if you use a weak nutrient solution. If you simply want to get started, you can find the beginner germination kit in the catalog.

Growing media and containers

The growing medium must retain water without becoming saturated and have a smooth surface where the seeds can stay firmly in place. The most commonly used options are:

  • Natural fiber mats (hemp, jute, cellulose): clean, easy to cut, and ideal for hydroponics.
  • Coconut coir: retains moisture well; it should be soaked and washed first, then used in a thin layer.
  • Peat or seed mixes: they work, but are messier. There are also peat pellets designed for germination.
  • Rockwool: in trays or cubes, widely used in professional growing, but less practical for cut microgreens.

Use shallow trays with drainage holes and a second tray underneath without holes to collect the water. Always wash them before reusing them: residues from the previous cycle are the most common cause of mold.

Sowing and density

  1. Prepare the growing medium. Moisten it thoroughly, drain off any excess, and level it.
  2. Sow evenly. Distribute the seeds by hand over the entire surface in a single dense layer: they should just touch, but not form clumps. The amount per tray varies by species (large seeds like peas and sunflowers require many more by weight than fine seeds like arugula and cabbage): start with the instructions on the package and adjust in subsequent cycles.
  3. Press down lightly. A little pressure helps the seeds adhere to the growing medium. Most species do not need to be covered with soil.
  4. Moisten with a mister. Wet the surface without disturbing the seeds.

Too many seeds piled up retain moisture and obstruct air circulation: this is the surest recipe for mold and rotten seedlings. Too few, on the other hand, will yield a poor but healthy harvest.

Darkness, light, and temperature

During the first 2–4 days, the seeds must be kept in the dark, in contact with the growing medium, and in a room-temperature environment. Cover the tray with another tray turned upside down or with an opaque lid, perhaps with a small weight on top: the pressure helps the roots anchor themselves and the stems grow straight. Check every day that the growing medium is moist.

When the seedlings are a few centimeters tall and have lifted the lid, uncover the tray and move it into the light. They need about 12–16 hours of light per day and a moderate PPFD, around 100–250 µmol/m²/s; details on lighting are in the guide on the basics of home hydroponic gardening and in the glossary under PPFD. A bright window may be enough in the warmer months, but in winter a regular LED lamp will give more consistent results. After exposure to light, the cotyledons will turn green in a day or two.

For those who want to grow more trays in the same space, there are solutions such as the vertical microgreens grower, the wheeled version, the 4-level greenhouse with LEDs, or the cart with LED lights.

Watering

The rule is to keep the growing medium moist, never waterlogged. After the dark stage, the best strategy is to water from below: pour the water into the bottom tray, let the growing medium absorb it for a few minutes, and drain off any excess. This keeps the leaves dry, which reduces the risk of mold. If you spray from above, use a mister and only when necessary, avoiding soaking. Often, clean water at room temperature is enough, and after the first couple of days in the light, a very diluted nutrient solution with low EC, 0.8–1.2 mS/cm, like the one for the plant guide mix. With very hard water, you can use demineralized or reverse osmosis water.

Harvesting and storage

Harvest when the cotyledons are fully open and a beautiful green, before the true leaves grow much, because the flavor becomes more bitter and the texture firmer. Cut just above the growing medium with clean scissors or a sharp knife, in the morning or at least before watering, so that the seedlings are dry. Eat them fresh: in the refrigerator, in a well-ventilated and dry container, they will last a few days. If you need to wash them, dry them thoroughly before storing them. The used growing medium should be discarded (or composted), never reused for a new cycle.

Common mistakes: mold and falling seedlings

Symptom Probable cause What to do
Dense white fuzz, also on the growing medium, with a stale smell Mold: sowing too densely, too much moisture, stagnant air Discard the tray, reduce the density, water from below, and add a small fan
Fine, downy white fuzz only on the roots, which disappears when sprayed Root hairs, which are normal No action needed: it is not mold
Seedlings wilting at the base Seedling death (damping off), too much water, and poor air circulation Reduce watering, sanitize trays and tools, and improve ventilation
Tall, pale seedlings with thin stems Too much darkness or insufficient light Reduce the time in darkness and increase the light
Uneven, patchy germination Old seeds, growing medium that is dry in places, uneven sowing Change the batch of seeds, moisten evenly, and review the distribution
Yellowed harvest with a bitter flavor Harvesting too late or insufficient light Harvest earlier and check the photoperiod

For prevention, hygiene is more important than care: washed trays, clean hands, fresh water, good-quality seeds, and air humidity that is not too high (see relative humidity). Never use pesticides on microgreens intended for consumption.

Frequently asked questions

How long does it take from sowing to harvesting?

It depends on the species and temperature: it ranges from less than a week for radish to two or three weeks for basil. Remember that the times given are estimates.

Are fertilizers needed?

Not for the first few days, because the seed contains the necessary reserves. For longer cycles or more demanding species, a very diluted nutrient solution (EC 0.8–1.2) can improve yield and color.

Can I grow microgreens in soil?

Yes, with light potting soil or a seed mix in a thin layer. Hydroponics with mats is cleaner and reduces residues on the harvest.

Are seeds for the vegetable garden suitable?

Those declared for food use are, but seeds for the vegetable garden are often treated with fungicides: check the label and use only untreated seeds.

How can I tell mold apart from root hairs?

Root hairs are fine, white, and appear near the roots, and they seem to disappear if you spray water. Mold is denser, covers the growing medium as well, and smells. If you are not sure, you can send a photo of the plant to the site chat assistant.

From theory to numbers

Continue with the tools

All tools